Notre Dame size

Discuss Millénaire in English
Post Reply
Littellittel
Posts: 2
Joined: Fri Feb 22, 2019 12:12 pm

Notre Dame size

Post by Littellittel » Fri Feb 22, 2019 12:15 pm

Hi, i recently started a new game with a few friends and now we want to build Notre Dame, we have the Quest and a wand. We cleared a big area but it still says that the location we picked cant accomodate the Building. So my questions are:

How big has the Area to be?

Are there Other requirements for the Area?

Where do I use the wand, where the center should be? The Entrance?

Thanks for your help.

lurkerwithin
Posts: 55
Joined: Tue Jun 18, 2013 2:33 am

Re: Notre Dame size

Post by lurkerwithin » Fri Feb 22, 2019 3:03 pm

The total size of the building plan is 112 blocks long and 48 blocks wide so you need a space of that size at least. It should be kind of a flat-ish surface as well. That's about as much advice I can give as I've never had too much problem picking out a spot.

Littellittel
Posts: 2
Joined: Fri Feb 22, 2019 12:12 pm

Re: Notre Dame size

Post by Littellittel » Fri Feb 22, 2019 4:34 pm

lurkerwithin wrote:The total size of the building plan is 112 blocks long and 48 blocks wide so you need a space of that size at least. It should be kind of a flat-ish surface as well. That's about as much advice I can give as I've never had too much problem picking out a spot.
thanks, we were just a bit short. For Future reference: You need about a 120x52 wide flat plane. I used the wand in the center of one of the shorter sides (dont know if thats relevant)

Post Reply